Reciprocating saw is one of the best tools invented to make household tasks and DIY projects more comfortable to handle. In this article, we will guide you with some of the reciprocating saw uses and techniques.
It is also known as Sabre saws or Sawzall saws, which are electric saws used in various domestic projects. Many household works require different tools and, thereby, vast amounts of money. But reciprocating saw saves your money, space, and time. It is an all-in-one tool that can replace many other handy tools. The movement of the cutting blade is like pull and push motion, and is often used in hard-to-reach places, where no other type of saw blade can be placed.
It is one of the best tools invented to make household tasks and DIY projects more natural to handle. In this article, we will guide you with some of the reciprocating saw uses and techniques.
Best uses of Reciprocating Saw
1. Make a slit in the walls
When you reshape a unit, and you need to put the wiring on the wall, you need to make a dent. Reciprocating saws are highly recommended when it comes to doing so, mainly if the area includes extraneous angles.
2. Replacement of PVC pipes
PVC pipes are usually located in small places where ordinary saws cannot reach, so generally, there is nothing more efficient than reciprocating saws. PVC is also easy to cut with this tool, so making any changes you need is duck soup.
3. Hard to cut nails or pins
Use a reciprocating saw when finding nails or pins that are difficult to remove. If you are working on an item where there is no other way to remove the nail or pin as it is a sturdy grip, you can use the reciprocating saw to cut the head as an alternative to removal.
4. Pruning Trees
If you need to remove the branches from your yard then use a reciprocating saw, this is a perfect tool due to its durability and cutting power. Why use a pruning tool when you have a fully equipped knife and does not require too much labor?
5. Installation of windows
This handy tool is also something professionals use to cut or install windows, as it can efficiently work in stressful and uncomfortable places.
6. Cutting of different materials
Recip saws are run nearby the encircling segments to cut the compressed wood sheathing. This works flawlessly in windows and doorway openings.
You can likewise cut the rooftop shingles, dividers, and different spots where the rooftop shingles and compressed wood sheathing go out of control.
This is conceivably the principle motivation behind why professional workers consider reciprocating saws to be their preferred tool.
You can use thick tooth blades to cut nails and nails that are difficult to remove. The same applies to the cutting of plaster. If you want to cut stones, cast iron, or tiles, then you can use a reciprocating saw with a toothless blade coated with tungsten carbide.
How to cut straight with Reciprocating saw?
The Reciprocating saw blade is a handy tool until your project requires cutting a straight line. The blade is comparatively thinner, and it has a tiny surface but cuts very well. Here are some tips and techniques you need to follow to achieve the most straight cut possible with your Reciprocating saw.
Straight cutting planks or boards horizontally
You can make sure your cut is clean and straight onto a wooden board or plank by locking the fence rails with clips along the working edge you are cutting. Use the C-clamp to securely hold your workpiece to the surface and make a running straight edge and clamp it down to the desired position.
If the cut moves while cutting, it ends with a very uneven cut, leaving a diagonal cut inside or outside the desired line.
Reciprocating saw feet are a piece on the blade head, which remains on the cutting surface. People would also call this a guide, and in many cases, it can be removed or exchanged with others. You will want this foot in place and rest its edges along the sides of the fencing track while making your cut. Flat side feet are better to keep it even, as you can keep the side pressure straight on the fencing track while cutting, without the blade veins worrying or coming out.
Straight cutting of vertical surfaces
As with cutting straight lines on planks or boards, mounting with fence rails, you can perform the same actions on vertical walls and partitions by applying the same basic concepts. Instead of mounting the surface, then fixing the tracks, simply attach the measurement results and attach the screws to the wall with wood. The same rules apply when using this technique so that you can cut directly with Sawzall saws.
This method allows the use of Sabre saws in all kinds of materials. It is necessary to make box holes or other linear applications. The rails of the fence can be made from 2 by 4 dowels or other flat scraps, with straight edges and sufficient length by hand. Enough edge for the reciprocating saw foot to follow without slipping off the cutting line.
Are Reciprocating saws dangerous?
Reciprocating saws can cut a wide range of materials, including wood, metal, and various building materials. But they can prove to be dangerous if not taken care of while using. So, they need to be handled with wide-open eyes and a fast working brain.
One of the main possible dangers of reciprocating saw uses is its possibility of reimbursement. It can happen if you make a mistake by withdrawing the blade from your cut while they’re still moving.
The tip of blade dims in the material you’re cutting, and the whole device, including moving stuff, backs at you. It is especially bad news if you’re on the stairs.
You should also note that the blade may get jammed anytime. It causes blades to stop moving, but neither you nor the device. Always try to keep a tight and oil-free grip.
One last warning: Reciprocating saw blades might generate a lot of heat, before touching it with our hands, give it enough time to cool down and only then you can change it.